Thermo Scientific Barnstead ISO Class 5 Cleanroom Etüv

Thermo Scientific Barnstead ISO Class 5 Cleanroom Etüv

HEPA filter for maximum contamination protection
Meets or exceeds ISO Class 5 air standards

Rapid temperature rise and recovery times

cleanroom etüv

User-friendly PID microprocessor temperature control allows you to repeatedly set operating temperature in the range of ambient +5C to 250C. Single program controller comes standard with two ramps and two dwells; ramp is adjustable from as low as 0.01C per minute, dwell from 0 to 9999 minutes. The adjustable high-limit hydraulic safety thermostat with indicator lamp maintains temperature a few degrees above set point in the event of primary control failure and prevents overtemperature conditions. HEPA filter model is available for maximum contamination protection. The 3"-thick silica-based insulation between oven chamber and exterior walls helps minimize heat radiation to surrounding environment. The drawer-style control panel is protected from spills and easily pulls out for accessibility. Interior chamber is constructed of corrosion-resistant stainless steel for easy cleaning. Exterior is constructed of durable cold-rolled steel with a white powder-coat finish.

Maximum temperature 250°C
Convection type Mechanical
Capacity cu ft 2.8
Temp range ambient ±5°C to 250 °C
Temp uniformity ±0.2°C at 100°C
Control type microprocessor PID
Rise time 22 minutes from ambient to 200°C
Display LED
HEPA Filter Included
Chamber size 14"W x 19-1/2"H x 18"D
Overall dimensions 26-2/3"W x 35"H x 24-1/4"D
Construction Stainless steel chamber, steel exterior
Power VAC 240
Hz 50/60
Amps 12.9


« Etüvler