TECHCOMP AA6000 Atomik Absorpsiyon Spektrofotometre Cihazı (AAS)

TECHCOMP AA6000 Atomik Absorpsiyon Spektrofotometre Cihazı (AAS)

AA 6000 Atomic Absorption Spectrophotometer is compact, intelligent, high sensitive, stable, accurate, user-friendly and durable spectrometer to meet routine analysis.


Excellent Optics Design

• Adopt half-mirror type single beam system and curve slit monochromator, maximum light intensity is utilized throughout the full spectrum.

• Unique Deuterium lamp background correction fully utilizes the lamp energy and enhances the signal-to-noise ratio.

Unique Burner System

• Conventional air cooling and water cooling can be selected.


Safety Functions

• Mass Flow Controller (MFC) for fuel adjustment.

• 2 flame sensors monitor the flame status.

• Safety is further proved with the safe burner head, dedicated waste drain trap and explosion proof burner.

6-Lamps Turret with auto-position

• Lamp turret can be rotated automatically to the position of HCL lamp for analysis.

• 2 lamps can be lighten up simultaneously (1 for working and 1 for pre-heating) to reduce the lamp warm up time.

Easy to use SAS (Spectrum Analyst Specialist) Software

• Full PC software control with Windows interface.

• Data are stored as database management format for easy processing.

• Easy to use 4 steps operation:

Select Element, Setting Parameters, Measure and Data Processing.


Automatic Functions

• For auto wavelength scan and peak search, auto energy balance of HCL and D2 lamp, auto select slit, auto lamp position and optimization, and auto flame ignition and put out with auto fuel gas flow rate setting.



Measuring mode

Flame Absorption, Emission and Hydride (Optional)

Optical system

Single beam, 1800 lines/mm grating

Wavelength range

190 – 900 nm

Wavelength accuracy

± 0.45 nm or Less

Wavelength reproducibility

0.2 nm or Less

Instrument resolution

Better than 0.3nm

Light source

6-lamp turret, 2 lamps simultaneous lighting


0.2, 0.4, 0.7, 1.4nm automatic switching

Baseline stability

≤ 0.005A / 30 min (Cu)

Background correction method

Deuterium lamp method

Background correction efficiency

≥ 30 times (When background signal nears 1 Abs)

Characteristic concentration

< 0.04 µg / ml / 1% (cu)

Detection limit

≤ 0.008 µg / ml (Cu)

Safety function

Flame sensor, Air pressure sensor, Drain trap sensor


« Spektrofotometreler