Lightnin ® LabMaster Mekanik Karıştırıcılar

Lightnin ® LabMaster Mekanik Karıştırıcılar

Scanning mode constantly updates mixing parameters—speed, power, torque, flow, and time

Reversible rotation for up-pumping experiments


These Lightnin LabMaster mixers deliver precise, programmable control of mixing speed and process powerboth in the lab and at the plant! Patented mixing impellers (three included) provide maximum efficiency in high-viscosity, gas-liquid contacting, blending, and solids suspension processes. Take advantage of the reversible rotation feature. Other mixers only pump downward, but this mixer can pump upward for your up-pumping experiments.
Repeatable data entry via the splash-proof digital keypad greatly enhances process consistency and ensures accurate scale-up. Visible and audible prompts guide you through program and data entry. View current running speed, and set running speed, direction, units, time, and impeller style in the SET mode. In the RUN mode, view current running speed and power, torque, flow, time, or temperature readings. Easily program the mixer to scan each of the measured parameters. The pumping capacity feature calculates flow rates for six different impeller designsideal for flow pattern studies and determining tank turnover rates.
Each mixer performs a diagnostic self-check at start up. The TENV, continuous-duty motor is fuse-protected for severe overload and features automatic speed adjustment for minor overloads. Overload, over-temperature, or shaft jam conditions stop the motor and are signaled by a display indicator and audible alarm.
Compact housing is made of chemical-resistant ABS plastic. The universal clamp lets you mount the mixer on tank rim, ring stand, or lattice framework. The clamp swivels 270 in two planes for quick setup.

Standard mixers offer excellent flow and fluid shear characteristics for low- to medium-viscosity liquids. The through-shaft design lets you adjust the extension of the mixer shaft without moving the mixer drive—accommodates shafts up to 3/8" diameter.

Speed range 50 to 1800 rpm
Max torque in-oz 71
Motor hp 1/8
Drive type Direct
Dimensions 6"W x 11-1/2"H x 5"D
Shaft length 24"
Shaft dia 3/8"
Impeller size 3.4" dia x 5/16" bore A-310
2.7" dia x 5/16" bore A-100
2.0" dia x 5/16" bore R-100
Mounting type Universal mounting clamp
Capacity 26 gal (100 L)
Power 230 VAC, 50 Hz
Shaft material 316 SS

« Mekanik Karıştırıcılar