HITACHI CT6E/ CT6EL Masaüstü Santrifüj

HITACHI CT6E/ CT6EL Masaüstü Santrifüj

 

Making an Exciting and Colorful Debut

Form never seen before
Selective color variation
Sporty and speedy acceleration
Global-standard safety
Environment adaptable product standardized by Hitachi


              CT6E                                       CT6EL

 

Specifications
Rotors for CT6E
Rotors for CT6EL

 

Features

USER-FRIENDLY

  • Easy-to-use operator panel
  • 5 sets of running parameters are programmable.
  • Rotor stop signal is selectable from 5 melodies.
  • Acceleration and deceleration settings are optimally selectable according to samples.

COMPACT

  • Low-height body allows rotor to be loaded/unloaded smoothly and speedily!
    CT6E/CT6EL tabletop centrifuges are compact for smooth and speedy loading/unloading of samples. The height from the bottom to the opening is 270 mm (60 mm lower than conventional models.)

ECOPRODUCTS

Meeting Hitachi's environmental standards!

Hitachi himac CT6E/CT6EL tabletop centrifuges are environmentally-friendly.

  • More recyclable, energy-saving and resource-saving than the conventional models
  • Reduced the use of hazardous substances

GLOBAL STANDARD

Safer tabletop centrifuges!
Compliance withmarking requirements

Mechanical safety (Compliance with IEC 61010-2-020 requirements)

  • CT6E/CT6EL tabletop centrifuges have passed the MCA (maximum credible accident) test.
  • This test confirms that no fragments are expelled from the centrifuge in the event of an accident.

  • Electrical safety (Compliance with IEC 61010-2-020 requirements)

  • Operator safety is ensured even under a single fault condition.
  • Double electric insulation construction for prevention shock events such as lightning, and all units have passed a general inspection under high-voltage conditions.

Electromagnetic compatibility (EMC Directive : Compliance with EN61326 and other requirements)

  • Strong immunity to erroneous operation or other malfunction from external electromagnetic emissions. (Protection from nearby lightning strikes and static electricity in dry winter air.)
  • Negligible electromagnetic emissions that would make peripheral equipment operate erroneously.


    SPECIFICATIONS

Moled

CT6E

CT6EL

Maximum speed

6,000 rpm

(T6AP angle rotor)

(T6AP2 angle rotor)

Maximum RCF

4,770 x g

(T6AP angle rotor)

(T6AP2 angle rotor)

Maximum capacity

1,000 ml (250 ml x 4 tubes)
(T5SS swing rotor)

2,000 ml (500 ml x 4 tubes)
(T3S6 swing rotor)

Speed control range

300 to 6,000 rpm (in increments of 100 rpm)

Timer

1 minute to 99 minutes (in increments of 1 minute) with a HOLD function (continuous operation)

Acceleration/deceleration time variable

2-stage variable acceleration,
2-stage braked deceleration and coasting deceleration

Memory-based programmed operation

5 programmed operations possible
(speed, run time, acceleration/deceleration settings and rotor stop signal)

Rotor stop signal

Selectable from 5 melodies, a beep tone and mute setting

Drive motor

Brushless DC motor (inverter control)

Safety device

Door interlock, dual overspeed detection, imbalance detection,
motor temperature abnormality detection, etc.

Compliance with standards

Complies with marking requirements.

Heat radiation

600W

Power requirements

Single phase , AC220-240V , 10A , 50/60Hz
AC100-120V, 15A, 50/60Hz

Dimensions

440W x 595D x 330H

540W x 720D x 330H

Weight

45kg

55kg

Colors

Strawberry pink, mint blue and sherbet silver

 

« Santrifüjler