FTS Vapor Trap

FTS Vapor Trap

Vapor Trap
Maximum efficiency for vacuum trapping vapors to -90°C, without LN2 or dry ice
Specification Sheet

Vapor Trap - FTS Systems Starts up in less than ten minutes
Cools to a low temperature of -50°C or -90°C
Accommodates vacuum pump flow rates up to 250 liters per minute
Traps one, three, or five liters of condensate in 24 hours
Applications
  Gel drying
  Evaporators
  Dryers
  Protection of oil-sealed vacuum pumps

 

Features Benefits
Mechanically refrigerated Eliminates the cost and potential hazards associated with dry ice and LN2
One touch operation Easy to use
Small footprint Saves space

 

Model Specifications1
  VT255 VT455 VT490 VT890
Maximum Low Temperature °C -50 -50 -90 -90
Chamber Volume (liters) 2 4 4 8
Trapping Rate (liters/24 hours) 1 3 3 5
Compressor 1/4 hp 1/3 hp Two @ 1/4 hp Two @ 1/4 hp
Controls On/Off On/Off On/Off On/Off
Indication ¾C - 1 1 1
Dimensions W x D x H inches 10.5 x 20.5 x 11 15.5 x 24 x 13 19 x 24 x 13 19 x 24 x 13
cm 26.7 x 52.1 x 27.9 39.4 x 61 x 33 48.3 x 61 x 33 48.3 x 61 x 33
Weight lbs/kg 55/25 55/25 85/39 85/39
Electrical2 120V/60 Hz/4A 120V/60 Hz/4A 120V/60 Hz/7A 120V/60 Hz/7A
1.Vapor traps do not include tops.
2. 220V/50 Hz also available. Decreases heat removal by 17%.

 

Vapor Trap Top Plates and Liners
Plates   
  SSVT2 Stainless steel vacuum top plate, 2L, 3/4" OD inlet, 5/8" OD outlet
  SSVT4 Stainless steel vacuum top plate, 4L, 3/4" OD inlet, 5/8" OD outlet
  SSVT8 Stainless steel vacuum top plate, 8L, 3/4" OD inlet, 5/8" OD outlet
  TTGT2 Glass vacuum top plate (safety-coated), 2L, 1/2" OD inlet/outlet
  TTGT4 Glass vacuum top plate (safety-coated), 4L, 1/2" OD inlet/outlet
  TTGT8 Glass vacuum top plate (safety-coated), 8L, 1/2" OD inlet/outlet
Liners   
  CRC2 Glass liner with copper mesh heat transfer jacket, titanium down tube, 2L, 1/2" OD inlet/outlet
  CRC4 Glass liner with copper mesh heat transfer jacket, titanium down tube, 4L, 1/2" OD inlet/outlet

 

« Sıcaklık Kontrollü Soğutma ve Isıtma Sistemleri