Cole-Parmer Programlanabilir Multi-Şırınga Pompaları

Cole-Parmer Programlanabilir Multi-Şırınga Pompaları

Ideal for low-flow, low-pressure applications where precision is needed
Built-in program lets you enter up to eight commands to perform a variety of functions�you can even repeat commands up to ten times; all settings are stored in nonvolatile memory
Pumps feature a wide dynamic range (100,000:1) allowing for flow rates from a slow trickle to a steady stream
RS-232 interface lets you operate your pump from a personal computer using a few simple commands�great for daisy-chaining pumps!
Backlit alphanumeric LCD steps you through setup and operating procedures


Program flow rate hold, pause, and change of direction; each command can be set to run for up to 12 hours. You can even program infusion/withdrawal pumps to sequence operations: either withdrawal followed by infusion or infusion followed by withdrawal. Choose pumps which accept two up to ten syringes�ideal for pumping exact proportions.

Pumps also feature two TTL inputs and two TTL outputs. The TTL inputs let you use a footswitch or a process timer to control pump operation. Use TTL outputs for 5 V signal and run indicator. All models include a 6-ft cord with grounded plug (U.S. standard plug on 115 VAC models, European plugs on 230 VAC models.

Syringe size accepted 10 µL to 140 mL
Linear motion 0.165 micron per microstep
Flow range (w/60 mL syringe) 0.001 µL/hr to 145 mL/min
Linear force 40 lb/sq. in
Accuracy ±1.0%
Reproducibility ±0.1%
Dimensions 11" x 9" x 6"
Power 115V

What's Included:
a 6-ft cord with grounded plug (U.S. standard plug on
115 VAC model and European plug on 230 VAC models).

****Kendi ihtiyacınıza uygun pompa sisteminizi oluşturmak için lütfen şirketimizle temas kurunuz. Çok çeşitli pompa kafaları, driverlar ve tubeler için Cole-Parmer Kataloğumuza bakabilir yada "istek ve önerileriniz" menümüzden katalog isteğinde bulabilirsiniz.

« Pompalar