Cole-Parmer ® Peristaltik Metering/Injector Pompalar

Cole-Parmer  ®  Peristaltik Metering/Injector Pompalar  

Search through our large selection of Pumps!
A cost-effective pump for pressure injection and chemical feed applications
High-pressure pumps are self priming
Digital keypad with LED confirms pump settings and operation
Built-in indicator alerts you when it is time to change tubing
Variable-speed models let you control flow via a remote signal

m4

With no internal check valves, these peristaltic pumps are not prone to clogging or fouling—ideal in applications with tough-to-handle solutions. Pump tubing assemblies last up to 1000 hours and take only minutes to change. Pumps also feature a rugged, chemical-resistant Valox ®  housing and tamper-resistant control cover.

The variable-speed models ensure uninterrupted metered output with no ON/OFF cycle and no injector downtime. Adjust settings from the keypad, or apply a remote signal for true proportional flow control.
Whats included: two Norprene ®  tubing assemblies, five feet of 3/8� OD vinyl suction tubing, five feet of 3/8� OD polyethylene discharge tubing, intake strainer with weight, and injector fitting with check valve.

Specifications
Wetted parts Norprene pump tubing and PVDF fittings
Max flow rate (GPH) 2.3 GPD (0.36 LPH)
Max pressure 100 psi
Max temperature 130°F (54°C)
Viscosity range 5000 cp max.
Tubing size 1/4" (pump); 3/8" (inlet/outlet)
Suction lift 30 ft (water at 0 psig)
Duty cycle continuous
Dimensions 10-1/8"W x 6-1/8"H x 9"D
Power VAC 115
Hz 60
Turndown ratio 20:1


****Kendi ihtiyacınıza uygun pompa sisteminizi oluşturmak için lütfen şirketimizle temas kurunuz. Çok çeşitli pompa kafaları, driverlar ve tubeler için Cole-Parmer Kataloğumuza bakabilir yada "istek ve önerileriniz" menümüzden katalog isteğinde bulabilirsiniz. « Pompalar