Cole-Parmer Chemical Feed Solenoid Diyaframlı Pompalar, 2-kafalı

Cole-Parmer Chemical Feed Solenoid Diyaframlı Pompalar, 2-kafalı

Search through our large selection of Pumps!
Pumps feature two separate head assemblies�obtain proportional flow rates for two different materials or twice the maximum flow rate when you are pumping just one
Change flow rates independently even while unit is operating
Overload-protected, fan-cooled, shaded-pole gear motor (1/35 hp) is permanently lubricated

diyafram pompa

Pumps include foot valve/strainer, polypropylene antisiphon valve, vinyl inlet and polyethylene outlet tubing, mounting hardware, and 6-ft, three-wire cord and plug.

Wetted parts polypropylene pump head, ceramic balls with O-rings of VITON, and an EP diaphragm coated with PTFE�also available in silicone or HYPALON®; consult our Application Specialists for details
Max flow rate GPH 2.7
ml/min 170
Max pressure 100 psi
Strokes per minute 30
Max temperature 140°F (60°C)
Tubing size 3/8"
Suction lift (wet) 5 ft
Duty cycle intermittent
Dimensions 7-1/2"Wx9-1/2"Hx4"D
Power VAC 115
Hz 60
Amps 0.25

****Kendi ihtiyacınıza uygun pompa sisteminizi oluşturmak için lütfen şirketimizle temas kurunuz. Çok çeşitli pompa kafaları, driverlar ve tubeler için Cole-Parmer Kataloğumuza bakabilir yada "istek ve önerileriniz" menümüzden katalog isteğinde bulabilirsiniz. « Pompalar