BK Precision Dijital Fonksiyon Jeneratörleri

BK Precision Dijital Fonksiyon Jeneratörleri

Produce waveforms at your specified frequencies
Adjustable attenuation of 0 to 20 dB
Model 26864-52 includes an internal frequency counter up to 30 MHz



These units generate sine, square, triangle, ramp, pulse, TTL and CMOS outputs, and offer variable duty cycle, and variable DC offset. Use coarse and fine tuning controls to accurately display the necessary reading on the five-digit LED display.
Model 26864-50 generates signals between 0.1 Hz to 10 MHz, in eight selectable ranges. This unit provides normal mode, adjustable linear or log sweep, and voltage controlled generator (VCG) functions.
Model 26864-52 generates signals between 0.2 Hz to 20 MHz, in eight selectable ranges. It offers the same features as the 26864-50, plus AM and FM modulation, burst mode and provides a built-in frequency counter up to 30 MHz.
What�s included: BNC-to-alligator clip cable, and power cord.

Frequency 20 MHz
Frequency accuracy Time base ±1 count
External frequency control 0 V to 10 V ±1 V (100:1)
DC offset voltage ±10 V (into 50 Ω load)
Sine wave distortion < or = 3% typical at 1 kHz
Square wave symmetry 0.2 Hz to 100 kHz < 2%
Triangle wave linearity > or = 98% to 100 kHz
Sweep rate 20 msec to 2 sec, adjustable
Sweep width 100:1 continuously variable
Output voltage 20 V (open circuit), 10 V (into 50 Ω load)
Attenuator -20 dB ±1 dB
Power 120/230 VAC, 50/60 Hz
Dimensions 11.75"W x 5.5"H x 10.575"D
Display Five-digit LED
TTL output Rise/fall: < or = 20 nsec
Level: 0.8 to 2.4 V
Rise/fall time < or = 120 nsec
Level 20 V p-p Open circuit, 10V p-p into 50Ω
Amplitude Variable, 20 dB range typical
Impedance 50Ω ±10%
Operating Modes Normal, Sweep, VCG, AM, FM, burst
Variable Duty Cycle 15:85:15 cont variable
Manufacturer number 4040A


« Elektronik Test Cihazları