BINDER VDL Serisi Vakumlu Etüvler (VDL23, VDL53, VDL115)

BINDER VDL Serisi Vakumlu Etüvler (VDL23, VDL53, VDL115)

 

Safety vacuum drying oven for flammable solvents

A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber of the VDL safety vacuum drying oven is designed according to ATEX guidelines for Zone II 3 G.

 

Advantages:
  • Maximum occupational safety with one-of-a-kind safety concept
  • Fast, condensation-free drying processes
  • Homogeneous specimen drying

 

Areas of application:
  • Chemicals
  • Surface Technology
  • Pharmaceuticals Industry

 

FeaturesCustomer benefitsCharacteristics
APT.line™
  • Gentle drying throughout the chamber interior
  • Absolute temperature uniformity
  • Direct transfer of heat to the specimens
  • Reproducible drying results

APT.line™ preheating chamber technology

  • Thermal conducting plates for homogeneous temperature distribution
  • Condensation-free inner chamber
  • Patented, flexible positioning of the expansion racks with large contact surfaces
Drying
  • Fast drying thanks to accelerated drying process
  • Light specimens (e.g. powder) are not swirled

BINDER Cross-Flow Principle

  • Even flow throughout the inner chamber from bottom to top
  • Finely adjustable valve without turbulence, individually controlled
Safety concept
  • Maximum occupational safety with recognized safety concept
  • Protection for user and laboratory
  • Broad range of applications due to explosion-proof inner chamber according to ATEX II3G
  • Continuous drying saves time and costs

Tested security

  • Spring-mounted safety glass panel with shatter protection (FDA tested)
  • Standard interior flushing with inert gas
  • Electronic components are decoupled from the inner chamber
  • Flame protection gasket
  • Automatic heating activated < 125 mbar
  • Over pressure capsuled instrument prevents gas penetration
  • ATEX-tested inner chamber
Cleaning
  • Simple, time-saving cleaning
  • Durable materials

Smooth inner chamber with rounded corners

  • Fixtures are fully removable
  • Inner chamber made of highly corrosion resistant stainless steel V4A (1.4571)
Complete system
  • Everything from one source
  • Optimal working height
  • 50% less noise
  • Pressure and temperature profiles are depicted simultaneously

Coordinated, modular system

  • Contains vacuum drying chamber, vacuum pumps, module and connection kit for various sizes
  • Application-specific vacuum pumps (standard membrane pump, speed-controlled or ATEX-protected membrane pump)
Accessories and Services
  • Convenient documentation and validation
  • BINDER INDIVIDUAL for customer-specific solutions
  • Worldwide BINDER Service

Comprehensive product portfolio

  • Years of proven and recognized validation and documentation materials
  • Various options: Digital pressure indicator, object temperature indicator
  • Vacuum pump and chamber controllable using FDA-compliant software APT-COM™
  • Worldwide service network

 

Inner chamber is designed according to ATEX guidelines for Zone II 3G

  • Electronically controlled APT.line™ preheating chamber with 2 expansion racks assuring temperature accuracy and reproducible results
  • Temperature range from 15 °C above ambient temperature to 200 °C
  • MP controller with 2 programs with 10 sections each or switchable to 1 program with 20 sections
  • Integrated weekly program timer with real-time function
  • Digital temperature setting with an accuracy of one degree
  • Elapsed time indicator
  • Spring-mounted safety glass panel with shatter protection
  • Precision-adjustable ventilation valve
  • Precision-adjustable inert gas valve with Cross-Flow-Technology
  • Safety features:
  • Pressure control device for heating activated < 125 mbar
  • Over pressure capsulated instrument panel with compressed air connection and maintenance unit
  • Flame protection gasket
  • Analog pressure gauge (displays pressure difference between the inner chamber and ambient pressure)
  • Electro polished inner chamber, suction and ventilation tubes, pressure container, expansion racks, and ball valve are made of stainless steel
  • Door gasket made of tempered silicone
  • Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
  • Measuring port DN 16
  • RS 422 interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  • 2 patented, flexible aluminum expansion racks
  • All electrical components are decoupled from the inner chamber
  • Available as a complete system, with module and vacuum pump. Features:
  • Reduced sound level
  • Practical working height
  • Well balanced system
  • BINDER test confirmation
  •  

    VDL 23
      Exterior dimensions  
      Width (mm) 515
      Height (incl. feet) (mm) 655
      Height with optional vacuum module (mm) 625
      Total Height with optional vacuum module (mm) 1280
      Depth (mm) 500
      Plus door handle, connection (mm) 100
      Wall clearance, rear (mm) 100
      Wall clearance, side (mm) 135
         
      Interior dimensions  
      Width (mm) 285
      Height (mm) 285
      Depth (mm) 295
      Interior volume (l) 23
      Expansion racks (aluminum) (number standard/max.) 2 / 4
      Distance between the racks (mm) 53
      Usable space per rack (width x depth) (mm) 234 x 280
      Load per shelf (kg) 20
      Permitted total load (kg) 35
      Weight (empty) (kg) 63
         
      Temperature data  
      Temperature range approx. 15 °C above ambient temperature to (°C) 200
      Temperature variation 1)  
      at 100 °C (± K) 1,5
      at 200 °C (± K) 3
      Temperature fluctuation (± K) 1) 0,1
      Heating up time 1), 2)  
      to 100 °C (min.) 65
      to 200 °C (min.) 100
         
      Vacuum data  
      Vacuum connection with small flange (DN mm) 16
      Measuring access port with small flange (DN mm) 16
      Inert gas connection with flow limiter thread (RP) 3 / 8
      Air pressure connection for pressurized apparatus (tube clip Ø / mm) 8
      Permitted end vacuum (mbar) 0,01
      Leak rate (max. bar 1/h) 0,01
         
      Electrical data  
      IP protection class acc. to EN 60529 IP 54
      Voltage (± 10%) 50 / 60 Hz 230
      Nominal power (kW) 0,8
      Energy consumption  
      at 100 °C (W) 105
      at 200 °C (W) 280

    1) Value with aluminum racks
    2) To 98% of the set value 

     

     

    VDL 53
      Exterior dimensions  
      Width (mm) 635
      Height (incl. feet) (mm) 775
      Height with optional vacuum module (mm) 625
      Total Height with optional vacuum module (mm) 1400
      Depth (mm) 550
      Plus door handle, connection (mm) 100
      Wall clearance, rear (mm) 100
      Wall clearance, side (mm) 135
         
      Interior dimensions  
      Width (mm) 400
      Height (mm) 400
      Depth (mm) 340
      Interior volume (l) 53
      Expansion racks (aluminum) (number standard/max.) 2 / 5
      Distance between the racks (mm) 62
      Usable space per rack (width x depth) (mm) 349 x 320
      Load per shelf (kg) 20
      Permitted total load (kg) 45
      Weight (empty) (kg) 95
         
      Temperature data  
      Temperature range approx. 15 °C above ambient temperature to (°C) 200
      Temperature variation 1)  
      at 100 °C (± K) 2
      at 200 °C (± K) 4,5
      Temperature fluctuation (± K) 1) 0,1
      Heating up time 1), 2)  
      to 100 °C (min.) 80
      to 200 °C (min.) 115
         
      Vacuum data  
      Vacuum connection with small flange (DN mm) 16
      Measuring access port with small flange (DN mm) 16
      Inert gas connection with flow limiter thread (RP) 3 / 8
      Air pressure connection for pressurized apparatus (tube clip Ø / mm) 8
      Permitted end vacuum (mbar) 0,01
      Leak rate (max. bar 1/h) 0,01
         
      Electrical data  
      IP protection class acc. to EN 60529 IP 54
      Voltage (± 10%) 50 / 60 Hz 230
      Nominal power (kW) 1,2
      Energy consumption  
      at 100 °C (W) 150
      at 200 °C (W) 445

    1) Value with aluminum racks
    2) To 98% of the set value 

     

     

     

    VDL 115
      Exterior dimensions  
      Width (mm) 740
      Height (incl. feet) (mm) 900
      Height with optional vacuum module (mm) 625
      Total Height with optional vacuum module (mm) 1525
      Depth (mm) 670
      Plus door handle, connection (mm) 100
      Wall clearance, rear (mm) 100
      Wall clearance, side (mm) 135
         
      Interior dimensions  
      Width (mm) 506
      Height (mm) 506
      Depth (mm) 460
      Interior volume (l) 115
      Expansion racks (aluminum) (number standard/max.) 2 / 6
      Distance between the racks (mm) 68
      Usable space per rack (width x depth) (mm) 455 x 440
      Load per shelf (kg) 20
      Permitted total load (kg) 65
      Weight (empty) (kg) 153
         
      Temperature data  
      Temperature range approx. 15 °C above ambient temperature to (°C) 200
      Temperature variation 1)  
      at 100 °C (± K) 3,5
      at 200 °C (± K) 9
      Temperature fluctuation (± K) 1) 0,1
      Heating up time 1), 2)  
      to 100 °C (min.) 95
      to 200 °C (min.) 150
         
      Vacuum data  
      Vacuum connection with small flange (DN mm) 16
      Measuring access port with small flange (DN mm) 16
      Inert gas connection with flow limiter thread (RP) 3 / 8
      Air pressure connection for pressurized apparatus (tube clip Ø / mm) 8
      Permitted end vacuum (mbar) 0,01
      Leak rate (max. bar 1/h) 0,01
         
      Electrical data  
      IP protection class acc. to EN 60529 IP 54
      Voltage (± 10%) 50 / 60 Hz 230
      Nominal power (kW) 1,9
      Energy consumption  
      at 100 °C (W) 250
      at 200 °C (W) 785

    1) Value with aluminum racks
    2) To 98% of the set value 

     

     

    OPTIONS
    ATEX connection kit VP 4, consists of: clamping rings, aluminum universal centering ring, transition piece adapter, anti-static vacuum hose, union nut, elbow O
    ATEX connection kit VP 5, consists of: clamping rings, aluminum, universal centering ring, outer centering ring, transition piece adapter, union nut, anti-static vacuum hose, elbow O
    Measuring port. For vacuum-tight access port of measuring lines into the device (9-pin) O
    Temperature measurement of the specimen via flexible PT 100 sensor (EX-proof via measurement current access port) and digital temperature display O
    Factory calibration certificate, measurement in center of chamber at 100 °C or at specified testing temperature O
    Extension to factory calibration certificate. Each additional measurement at additional measuring point or testing temperature O
    VP 4 chemical membrane pump (nominal air flow 1.9 m³/hour, final pressure 12 mbar), with separator and emission condenser 230 V 1N ~ 50 Hz O
    Expansion racks, aluminum O
    Expansion racks, stainless steel O
    Exchange and calibration to stainless steel expansion racks, standard equipment aluminum expansion racks are replaced O
    Door gasket, FKM (Viton) O
    Vacuum module (empty) for installation of vacuum pumps O
    Vacuum module with membrane pump VP 4, mechanical and electrical membrane pump components EX-proof, ATEX approved (nominal air flow 1.9 m³ / hour, final pressure 12 mbar), with separator and emission condenser, including all necessary vacuum connection parts O

     

    « Etüvler