BINDER MKFT Serisi Stabilite Test Kabinleri (MKFT115, MKFT240)

BINDER MKFT Serisi Stabilite Test Kabinleri (MKFT115, MKFT240)

 

Environmental simulation chamber for low temperature alternating climate profiles

The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.

Advantages:
  • State-of-the-art reliability
  •  

  • User-friendly chamber interior
  •  

  • Comprehensive standard equipment
  •  

    Areas of application:
    • Automotive
    • Electronics / Semiconductor Industry
    • Aerospace, Defense Industry

     

    FeaturesCustomer benefitsCharacteristics
    APT.line™ climate technology
    • Same test conditions throughout the chamber interior
    • Independent of specimen size and quantity

    APT.line™

    • Uniform circulation even under full load
    • Homogeneous climate conditions throughout test specimens
    Humidification system and water supply
    • Minimal maintenance requirements
    • Simple, clean handling
    • Flexible water management
    • Fast response times

    Vapor pressure humidification

    • Drift-free, capacitive humidity sensor for very accurately measured values
    • External water supply via tap or tank
    • Water treatment with BINDER PURE AQUA SERVICE
    • Sewage pump for discharges up to 1 m in height
    Standard equipment
    • Very good price/performance ratio

    Well equipped

    • Capacitive humidity sensor
    • Heated viewing window
    • LED illumination
    • Rugged chassis with rollers from 115 liters
    • Ethernet interface
    Unit design
    • Minimum space requirements
    • Convenient, safe access
    • Easy assembly

    Good use of space

    • Optimal ratio of usable space and footprint
    • All operator controls accessible from the front
    • Wide construction
    Production
    • Reliable devices with long service lives
    • Short delivery times
    • Premium quality made in Germany
    • Highly automated series production (20,000 units per year)
    • High-quality materials, state-of-the-art production technology
    Accessories and Services
    • Complete system from one source

    Comprehensive product portfolio

    • Additional production lines with drying and vacuum chambers
    • Control and documentation software APT-COM™
    • BINDER Data Logger Kits
    • Water treatment with BINDER PURE AQUA SERVICE
    • Years of proven and recognized validation and documentation materials

     

     

    Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results

  • Temperature range without humidity: -70 °C to 180 °C
  • Temperature range with humidity: 10 °C to 95 °C
  • Humidity range 10 % to 98 % RH
  • MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
  • User-friendly LCD screen
  • Easy-to-read menu guide
  • Integrated electronic chart recorder
  • Variety of options for the graphic display of process parameters
  • Real-time clock
  • Electronically controlled humidification and dehumidification system with capacitive humidity sensor and vapor pressure humidification
  • Integrated water storage tank
  • Heated viewing window with LED interior lighting
  • Programmable condensation protection for test material
  • Adjustable ramp function via program editor
  • 230 V power socket on the right-side operating panel
  • Independent adjustable temperature safety device Class 2
  • 4 potential-free relay outputs that can be activated via MCS controller
  • Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  • BINDER Communication software APT-COM™ 3 Basic Edition
  • Access port Ø 50 mm, left side
  • 4 casters (2 with brakes)
  • Stainless steel rack included
  • BINDER test confirmation
  •  

    MKFT 115
      Exterior dimensions
    Width (mm) 1000
    Height (incl. castors) (mm) 1725
    Depth (incl. cable and door handle) (mm) 915
    Wall clearance rear (mm) 300
    Wall clearance side (mm) 200
    Viewing window width (mm) 288
    Viewing window height (mm) 222
    Number of doors (ea.) 1
    Interior dimensions
    Width (mm) 600
    Height (mm) 480
    Depth (mm) 400
    Interior volume (l) 115
    Racks (number standard/max.) 1 / 4
    Load per shelf (kg) 30
    Permitted total load (kg) 60
    Weight (empty) (kg) 330
    Temperature data
    Temperature range (°C) -70 - 180
    Temperature fluctuation (±K) 0,1 - 0,5
    Temperature variation (±K) 0,1 -1,3
    Mean warm-up rate acc. to IEC 60068-3-5 (K/min.) 5,5
    Mean cooling rate acc. to IEC 60068-3-5 (K/min.) 4,2
    Max. heat compensation up to 25 °C (W) 1500
    Climate data
    Temperature range (°C) 10 - 95
    Temperature fluctuation (± K) 0,1 - 1,0
    Humidity range (% RH) 10 - 98
    Humidity fluctuation (± % RH) ≤ 2,5
    Dew point temperature range (°C) 5 - 94
    Max. heat compensation to 25 °C / 90 % RH (W) 400
    Electrical data
    IP protection class acc. to EN 60529 IP 20
    Voltage (± 10%) 50 Hz (V) 400 3N~
    Nominal power (kW) 6,2
    Energy consumption 25 °C / 60 % RH (Wh/h) 1) 1250
    Noise level approx. (dB (A)) 62

     

    1) These values can be used for dimensioning air condition systems.

     

     

    MKFT 240 (E3.1)
      Exterior dimensions
    Width (mm) 1135
    Height (incl. castors) (mm) 1940
    Depth (incl. cable and door handle) (mm) 1000
    Wall clearance rear (mm) 300
    Wall clearance side (mm) 200
    Viewing window width (mm) 508
    Viewing window height (mm) 300
    Number of doors (ea.) 1
    Interior dimensions
    Width (mm) 735
    Height (mm) 700
    Depth (mm) 443
    Interior volume (l) 228
    Racks (number standard/max.) 1 / 6
    Load per shelf (kg) 30
    Permitted total load (kg) 70
    Weight (empty) (kg) 415
    Temperature data
    Temperature range (°C) -70 - 180
    Temperature fluctuation (±K) 0,1 - 0,5
    Temperature variation (±K) 0,2 - 1,8
    Mean warm-up rate acc. to IEC 60068-3-5 (K/min.) 5,0
    Mean cooling rate acc. to IEC 60068-3-5 (K/min.) 4,2
    Max. heat compensation up to 25 °C (W) 3000
    Climate data
    Temperature range (°C) 10 - 95
    Temperature fluctuation (± K) 0,1 - 1,5
    Humidity range (% RH) 10 - 98
    Humidity fluctuation (± % RH) ≤ 2,5
    Dew point temperature range (°C) 5 - 94
    Max. heat compensation to 25 °C / 90 % RH (W) 400
    Electrical data
    IP protection class acc. to EN 60529 IP 20
    Voltage (± 10%) 50 Hz (V) 400 3N~
    Nominal power (kW) 7,5
    Energy consumption 25 °C / 60 % RH (Wh/h) 1) 1500
    Noise level approx. (dB (A)) 65

     

    1) These values can be used for dimensioning air condition systems.

     

     

    OPTIONS
    Access ports with silicone plug, 30, 50, 80, 100, 125 mm O
    Securing elements for additional fastening of racks (1 set of 4) O
    Analog output for temperature 4 - 20 mA with 6-pin DIN socket (output not adjustable) O
    Door lock O
    Additional measuring channel for digital display of specimen temperature with flexible PT 100 temperature sensor. Measuring data recorded through device interface O
    Temperature safety device for over and under temperature, Class 2 O
    RS 422 interface O
    Temperature measurement acc. to DIN 12880-2 and 9-point humidity measurement/factory standard with protocol and certificate at 25 °C / 60% RH or at specified values O
    Calibration certificate for temperature and humidity. Measurement in center of chamber at 25 °C / 60% RH or at specified values O
    Extension to calibration certificate for temperature and humidity. Each additional measurement at an additional measuring point or set of values O
    BINDER PURE AQUA SERVICE containing single-use cartridge, cabling, and pump O
    Single-use cartridge for BINDER PURE AQUA SERVICE O
    Water circle, possibility to reuse water O
    Data Logger Kit TH 100/70: With two attachable combined sensors for temperature and humidity recording O
    Data Logger Kit TH 100: With one attachable combined sensor for temperature and humidity recording O
    Data Logger Kit TH 220: With PT 100 sensor for temperature recording O
    Data Logger Software O
    Rack, stainless steel O
    Reinforced rack, stainless steel, with 1 set of fasteners (4 pieces), max. load 70 kg O
    Shelf perforated, stainless steel O
    Notch-type access port in door, 100 x 35 mm O

    « Isıtmalı ve Soğutmalı Test Kabinleri