BINDER KBWF Serisi Bitki Büyütme Kabinleri ( KBWF240, KBWF720 )

BINDER KBWF Serisi Bitki Büyütme Kabinleri ( KBWF240, KBWF720 )

 

Climate chamber with illumination

The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this climate chamber to create constant lighting and temperature conditions.

 

Advantages:
  • Homogeneous light distribution
  • Natural growth conditions
  • Temperature, humidity & light in one unit

 

Areas of application:
  • Cosmetics Industry
  • Plant / Insect Growth
  • Packaging Industry

 

FeaturesCustomer benefitsCharacteristics
APT.line™ climate technology
  • Same test conditions throughout the chamber interior
  • Independent of specimen size and quantity
  • No drying out of specimens

APT.line™

  • Constant and gentle circulation of air through large-surface side walls even under a full load
  • Homogeneous climate conditions throughout all specimens
Light
  • Up to 20% greater usable space
  • Light sources adjustable to specimen sizes
  • Same irradiation results throughout the chamber interior
  • Flexible positioning and fully removeable illumination cassettes
  • Excellent light uniformity for all specimens on the entire shelf
  • Different light spectra can be used
Cooling system
  • Reliable testing independent of ambient conditions
  • Powerful compressor cooling system with large power reserves for lighting applications
  • No freezing thanks to double evaporator plate
  • Carefully measured cooling
Water supply
  • Flexible water management
  • Easy plug-and-play handling
  • Direct connection to the domestic water system
  • External water supply via tap or tank
  • Water treatment with BINDER PURE AQUA SERVICE
  • Sewage pump for discharges up to 1 m in height
  • Back Pack System
Humidification system
  • Very accurately measured values
  • Minimal maintenance requirements
  • Safe, reproducible attainment of test results
  • Vapor pressure humidification for fast response times
  • Drift-free, capacitive humidity sensor
  • Short recovery time after door opening
Standard equipment
  • No extra costs
  • Chamber is easily moved on casters

Comprehensive standards

  • Communication interface
  • Access port diameter 30 mm
  • BINDER test certificate
  • Casters
  • Inner glass door and double outer door seal
  • Door heated against condensation
Unit design
  • Minimum space requirements
  • Easy assembly
  • Large chamber interior volume
  • Easy cleaning
  • Optimal ratio of usable space and footprint
  • Large access area thanks to wide design
  • Chamber interior made out of high-quality stainless steel
  • Closed illumination cassettes
  • No permanent fixtures
Accessories and Services
  • Complete solution
  • Everything from one source
  • BINDER Service is always nearby

Comprehensive product portfolio

  • Various options: BINDER Data Logger Kits, access ports in various sizes and positions, control and documentation software APT-COM
  • Years of proven and recognized validation and documentation materials
  • Worldwide service network

 

 

Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results

  • Temperature range 0 °C to 70 °C (without humidity and illumination)
  • Temperature range 20 °C to 60 °C (with humidity and illumination)
  • Humidity range 10 % to 80 % RH (without illumination)
  • Humidity range 10 % to 75 % RH (with illumination)
  • 3 variable positioned illumination cassettes with 5 daylight illumination tubes, each, in steps switchable
  • The patented illumination system assures an unique homogeneous light distribution
  • MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments for programming of day and night cycles
    • Integrated electronic chart recorder
    • Variety of options for the graphic display of process parameters
    • Real-time clock
  • Controlled humidification and dehumidification system with capacitive humidity sensor
  • Independent adjustable temperature safety device class 3.1, providing full protection against chamber over-temperature, with visual and audible temperature alarm
  • Access port Ø 30 mm, left side
  • Inner glass door
  • Safety connection kit for water supply and drainage, including water hose, total length 6 m
  • RS 422 interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  • 3 stainless steel racks
  • BINDER test confirmation
  •  

    KBWF 240 (E5.2)
      Exterior dimensions
    Width (mm) 930
    Height (incl. casters) (mm) 1460
    Depth (incl. door handle, I-triangle, connection 80 mm) (mm) 800
    Wall clearance, rear (mm) 100
    Wall clearance, side (mm) 100
    Steam space volume (l) 348
    Number of doors (ea.) 1
    Inner glass door(s) (ea.) 1
    Interior dimensions
    Width (mm) 650
    Height (mm) 785
    Depth (mm) 485
    Interior volume (l) 247
    Racks (number standard/max.) 2 / 7
    Load per rack (kg) 30
    Permitted total load (kg) 100
    Weight (empty) (kg) 214
    Variable position illumination cassettes 2
    Temperature data (without humidity)
    Temperature range without illumination cassettes (°C) 0 - 70
    Temperature range with illumination cassettes with illumination (°C) 10 - 60
    Max. heat compensation up to 40 °C with illumination (W) 400
    Climate data (with humidity)
    Temperature range without illumination cassettes (°C) 10 - 70
    Temperature range with illumination cassettes with illumination (°C) 10 - 60
    Temperature variation with illumination (± K) 0,5 - 1,0
    Temperature fluctuation with illumination (± K) 0,1 - 0,5
    Humidity range without illumination cassettes (% RH) 10 - 80
    Humidity range with illumination cassettes, with illumination (% RH) 10 - 75
    Humidity fluctuation with illumination (± % RH) 2
    Illumination data per light cassette
    Daylight tubes (Lux) 10.000
    Daylight tubes (W/m²) 36
    Fluora® growth lamps (Lux) 6.500
    Fluora® growth lamps (W/m²) 34
    Arabidopsis tubes (Lux) 10.000
    Arabidopsis tubes (W/m²) 40
    Electrical data
    IP protection class acc. to EN 60529 IP 20
    Voltage (± 10 %) 50 Hz (V) 230, 1 N ~
    Nominal power (kW) 2,4
    Energy consumption at 37 °C / 75 % RH 1) (W) 600 (9x20-0166), 660 (9x20-0251)
    Noise level approx. (dB (A)) 52

     

    1) These values can be used for dimensioning air condition systems

     

     

     

    KBWF 720 (E5.2)
      Exterior dimensions
    Width (mm) 1255
    Height (incl. casters) (mm) 1925
    Depth (incl. door handle, I-triangle, connection 80 mm) (mm) 890
    Wall clearance, rear (mm) 100
    Wall clearance, side (mm) 200
    Steam space volume (l) 918
    Number of doors (ea.) 2
    Inner glass door(s) (ea.) 2
    Interior dimensions
    Width (mm) 973
    Height (mm) 1250
    Depth (mm) 576
    Interior volume (l) 700
    Racks (number standard/max.) 3 / 12
    Load per rack (kg) 45
    Permitted total load (kg) 150
    Weight (empty) (kg) 374
    Variable position illumination cassettes 3
    Temperature data (without humidity)
    Temperature range without illumination cassettes (°C) 0 - 70
    Temperature range with illumination cassettes with illumination (°C) 10 - 60
    Max. heat compensation up to 40 °C with illumination (W) 1.000
    Climate data (with humidity)
    Temperature range without illumination cassettes (°C) 0 - 70
    Temperature range with illumination cassettes with illumination (°C) 20 - 60
    Temperature fluctuation with illumination (± K) 0,1 - 0,5
    Temperature variation with illumination (± K) 1,0 - 1,5
    Humidity range without illumination cassettes (% RH) 10 - 80
    Humidity range with illumination cassettes, with illumination (% RH) 10 - 75
    Humidity fluctuation with illumination (± % RH) ≤ 2,5
    Illumination data per light cassette
    Daylight tubes (Lux) 11.450
    Daylight tubes (W/m²) 33
    Fluora® growth lamps (Lux) 10.500
    Fluora® growth lamps (W/m²) 31
    Arabidopsis tubes (Lux) 14.400
    Arabidopsis tubes (W/m²) 38
    Electrical data
    IP protection class acc. to EN 60529 IP 20
    Voltage (± 10 %) 50 Hz (V) 230, 1 N ~
    Nominal power (kW) 3,5
    Energy consumption at 37 °C / 75 % RH 1) (W) 2.350
    Noise level approx. (dB (A)) 53

     

    1) These values can be used for dimensioning air condition systems.

     

     

    OPTIONS
    Access ports with silicone plug 30, 50, 100 mm O
    Securing elements for additional fastening of racks (1 set of 4 pieces) O
    Keyboard lock O
    Ethernet interface for communication software APT-COM™ DataControlSystem O
    External fresh water supply set consits of fresh and waste water tank with 20 liter each, cabling and pump O
    BINDER PURE AQUA SERVICE consisting of disposible cartridge, hose set and measuring unit O
    Disposable cartridge for BINDER PURE AQUA SERVICE O
    Factory calibration certificate for temperature and humidity. Measurement in center of chamber at 25 °C / 60 % RH or at specified values O
    Extension to factory calibration certificate for temperature and humidity. Each additional measurement at an additional measuring point or set of values O
    Temperature precision measurement according to DIN 12880 and 9-point humidity measurement / factory standard with measurement log and certificate, measured at 25 °C / 60 % RH or at specified values O
    Data Logger Kit TH 70: For the continuous temperature and humidity recording of -40 °C to 70 °C / 0 % to 100 % RH. Kit includes 1 data logger, 1 attachable combined humidity/temperature sensor with 2 m extension cable and 1 fixture for the connection at the BINDER unit O
    Data Logger Kit TH 70/70: With two attachable combined sensors. One for the continuous temperature and humidity recording of -40 °C to 70 °C / 0 % to 100 % RH. Second one at the data logger for recording the environmental conditions. Kit includes 1 data logger, 2 attachable combined humidity/temperature sensors with 2 m extension cable and 1 fixture for the connection at the BINDER unit O
    Data Logger Kit T 220: For the continuous temperature recording of -90 °C to 220 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for the connection at the BINDER unit O
    Data Logger Software: Configuration und evaluation software for all BINDER Data Logger Kits, incl. data cable (RS 232) O
    Rack, stainless steel O
    Shelf, perforated, stainless steel O
    Reinforced rack, stainless steel, with 1 set of securing elements (1 set of 4 pieces), max. load 70 kg O
    Vibration compatible shelf / platform (positioned at bottom level) to be mounted inside the chamber for shaker / spinner / roller operation. Other positions available on request O
    4-20 mA analog output for temperature and humidity measurements (e.g. chart recorder connection), with 6-pin DIN socket. Outputs are adjusted automatically as the controller is adjusted O
    Zero-voltage relay alarm outputs for temperature (±2 °C) and humidity (±5 % RH), accessible via 6-pin DIN socket, with audible signal that can be switched off (maximum power rating 24 V AC/DC, 2.5 A) O
    FLUORA® growth lamps set as replacement for the standard tubes for 230 V O
    Arabidopsis fluorescent tubes set as replacement for the standard tubes for 230 V O
    Replacement set of standard daylight illumination tubes for one illumination cassette O
    Replacement set of FLUORA® illumination tubes for one illumination cassette O
    Replacement set of Arabidopsis illumination tubes for one illumination cassette O
    Locking door handle with key O
    Temperature safety device, class 3.3 (DIN 12880) with optical alarm O

    « Bitki Büyütme Kabinleri