AB Lorentzen Wettre Numune Hazırlama Aleti ( PUNCH ) Pnömatik - 100cm2 numuneler için

AB Lorentzen Wettre Numune Hazırlama Aleti ( PUNCH ) Pnömatik - 100cm2 numuneler için

L&W Sample Punch is intended for easy and rapid preparation of circular or square test pieces to be used in the determination of grammage. The punch is pneumatically operated for ease of use and the specially designed sample holder ensures extremely good cutting results on both thin and tough materials.

L&W Sample Punch 100 cm² is intended for preparation of circular or square test pieces with uniform edges.

nh6 

A sample holder around the die presses the sample tightly against the die before cutting. The punch has slanting edges, which allows cutting of thick materials using moderate pressures and also reduces wear of the punch. The punch and the die are made of tempered tool steel for maximum precision and to ensure long life. The finished samples are collected in a box placed below the punch.

There are connections for instrument air, an air pressure regulator and a gauge, and connection for a foot switch on the rear panel. For protection from hand or finger injuries there is a safety device in front of the punch.

 

Specifications
  • Precision cutting of samples
  • Wide working range
  • One or more sheets can be punched simultaneously
  • Robust construction
  • Equipped with safety device
Specification

L&W Sample Punch 100 cm² – Code 140


Instrument

Available for following test pieces sizes

circular 100 cm² (15.5 in²) or
square 100 × 100 mm



Test piece

Thickness
4 mm (160 mils) max


Installation requirements

Instrument air
0.5–0.75 MPa (75–110 psi)


Option
Foot switch

Size

Dimensions
0.3 × 0.4 × 0.3 m
12 × 16 × 12 in
Volume
0.1 m³
3.5 ft³




Net weight
30 kg
66 lb
Gross weight
37 kg
82 lb

« Kağıt / Karton Test Cihazları