VIRTIS Freezemobile Series

VIRTIS Freezemobile Series

The Freezemobile Large Capacity Freeze Dryer is available with condenser capacities of 25 or 35 Liters. Condenser refrigeration packages of -53, -70 and -85C are available to allow configuration for a variety of solvents. A wide array of manifolds are available including stainless steel and acrylic, tree or drum manifolds, heated or unheated shelves with bulk or stoppering.

freezemobile

KEY FEATURES

  • Mobile, free standing design
  • Choice of refrigeration systems with temperatures of -53, -70 or -85C
  • Smooth wall condenser for quick defrost turnaround time
  • Convenient front facing vacuum pump oil quick-change module
  • Pressure control to provide heat transfer for sublimation as required
  • Wide variety of manifolds and accessories available
  • Optional filter traps to protect the vacuum pump
  • KEY BENEFITS

  • Configure a system to meet your application/solvent needs
    • Acrylic manifold and adaptor plate for aqueous and inorganic solvent applications
    • Stainless steel manifold and adaptor plate for aqueous and organic solvent applications
  • Large batch processing in a single run with 25 or 35 liter condenser capacity
  • Accommodate a wide variety of product solvents with temperatures to -85C
  • Minimize downtime with quick-defrost turnaround time
  • Shorten cycles with pressure control for enhanced heat transfer
  • Easy install, requires standard laboratory utilities
  • SPECIFICATIONS

    Specification
    ES
    XL
    EL
    Maximum Low Condenser Temperature (°C) 60Hz or 50Hz
    -53C / -50C
    -75C / -67C
    -85C / -82C
    Maximum Low Temperature for Optional Shell Bath (°C) 60Hz / 50Hz
    -45C / -42C
    -55C / -52C
    -70C / -67C
    Condenser Capacity in 24 hours* FM25 / FM35
    This specification is based on freeze drying water as aggessively as possible.
    The ability to collect ice is application dependent and your actual rate will most likely be lower
    14 L / 20L
    Condenser Capacity Total FM25 / FM35
    25 L / 35L
    Condenser Surface Area FM25 / FM35
    506 in2 /3264 cm2 / 750 in2 / 4838 cm2
    Vacuum Pull Down Time to 100 mT (0.133 mB) (minutes)
    ≤20 minutes
    Lowest Vacuum mT / mB (Refrigerated, Dry and Empty)
    15 mT / .0198 mB
    Note: Performance specifications are based on SP Industries test data from units operating at an ambient room temperature of approximately 20 °C.
    SP Industries recommends an operating range of 15-25 °C (59-77 °F).
    FM25

    Dimensional Data
    Width (in. / cm)
    35 / 89
    Depth (in. / cm)
    29 / 74
    Height (in. / cm)
    37 / 94
    Approximate
    Weight (lb / kg)
    280-495 / 127-225
    FM35

    Dimensional Data
    Width (in. / cm)
    35 / 89
    Depth (in. / cm)
    36 / 91
    Height (in. / cm)
    37 / 94
    Approximate
    Weight (lb / kg)
    450-500 / 205-225
    Valve Adapters
    179622 3/4" Port Adapter - Straight Glass Adapter for connecting 40 and 75mL Fliter Seal Flasks to 3/4" ports.
    177873 3/4" Port Adapter - 45 Degree Glass Adapter for connecting 40 & 75mL flasks to 3/4" ports.
    179655 3/4" Port Adapter - Straight Glass Adapter for connecting 150 - 2000 mL Filter Seal Flasks to 3/4" ports.
    177923 3/4" Port Adapter - Straight Stainless Steel Adapter for connecting 150-2000 mL filter seal flasks to 3/4" ports.
    367424 3/4" Port Adapter - Straight Plastic Connector for connecting 150-2000 mL filter seal flasks to 3/4" ports.
    177899 3/4" Port Adapter - 45 Degree Glass Adapter for connecting 150-2000 mL Filter Seal Flasks to 3/4" ports.
    177931 3/4" Port Adapter - 45 Degree Stainless Steel Adapter for connecting 150-2000mL filter seal flasks to 3/4" ports.
    179580 1/2" Port Adapters - straight flanged glass, required for connecting 40mL to 75mL wide mouth filter seal flasks to Quickseal valves.
    177907 1/2" Port Adapters - straight flanged stainless steel, required for connecting 40mL to 75mL wide mouth filter seal flasks to Quickseal valves.
    179606 1/2" Port Adapters - 45° flanged glass, required for connecting 40mL to 75mL wide mouth filter seal flasks to Quickseal valves.
    177915 1/2" Port Adapters - 45° flanged stainless steel, required for connecting 40mL to 75mL wide mouth filter seal flasks to Quickseal valves.
    179648 1/2" Port Adapters - straight flanged glass, required for connecting 150mL to 2000mL wide mouth filter seal flasks to Quickseal valves.
    177881 1/2" Port Adapters - 45° flanged glass, required for connecting 150mL to 2000mL wide mouth filter seal flasks to Quickseal valves.
    171934 1/4" Removable Ampoule Adapter - for 1/2" and 3/4" Quickseal(r) Valve (ea.)
    177956 Triple Adapter (ea.) (for use with # 179234 1mL Ampoule)
    177964 Stoppering Adapter for 1/2" Quickseal(r) Valve (ea.)
    177972 Stoppering Adapter for 3/4" Quickseal(r) Valve (ea.)
    177998 Scintillation Vial Adapter - for 1/2" Ports (ea.)
    178004 Scintillation Vial Adapter - for 3/4" Ports (ea.)
    413534 Ampoule Adapter, 19 port with tubing and plugs, for use with ampoules with 8-10mm outside diameter at the top of the stem.
    Ampoules
    179234 Pre-Scored Ampoule - 1 mL for use with triple adapter - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    179259 Pre-Scored Ampoule - 1 mL - manufactured of borosilicate glass to maximize sample integrity.(144/pk)
    179275 2mL Stoppering Ampoule - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    179283 Pre-Scored Ampoule - 5mL - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    179291 Pre-Scored Ampoule - 10mL - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    179317 10 mL Round Bottom Ampoule - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    179333 25 mL Round Bottom Ampoule - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    179341 50 mL Round Bottom Ampoule - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    179366 Tear Drying Bulb - 1 mL - manufactured of borosilicate glass to maximize sample integrity. (144/pk)
    Sealing Torch
    172064 Two Burner ampule sealing torch (for Oxygen-Gas Mixture) - complete with 2 Stainless steel tips
    172072 Two Burner ampule sealing torch (for Air-Gas only) - complete with 2 Brass tips
    172080 Three Burner ampule sealing torch (for Oxygen-Gas Mixture) - complete with 3 stainless steel tips
    172106 Three Burner ampule sealing torch (for Air-Gas Only) - complete with 3 brass tips
    172122 Replacement brass tip - for the 2 burner sealing torch (air-gas)
    172148 Replacement brass tip - for the 3 burner sealing torch (air-gas)
    172163 Replacement Stainless Steel tip - for 3 burner torch (Oxygen-Gas Mixture)
    Condenser Door
    256883 Replacement Stainless Steel tip - for 2 burner torch (Oxygen-Gas Mixture)
    354126 Door Latch Modifier for 1 Inch thick Condensor Door (For Part # 399517)
    399517 Lucite Condenser Door, 1 inch thick, 12L, 25L and 35L Genesis, Ultra, Freezemobile and GPFD Units. Door Latch Modifier Needed and Mach Screws to Complete the assembly.
    Filters
    118364 Disposable 0.2uM Absolute Gas Filter for placement between flasks and manifolds (ea.)
    132159 Spare Pall Filter - 0.2 Micron absolute for PF-3 housing
    172494 Filter Paper Discs for Scintillation Vial Adapters (100 discs per package)
    Traps
    100004724 Filter Trap Assembly, includes trap stand and necessary bolts and tubing. Needs bracket mounted to the side panel and holes drilled for vacuum lines. (For Freezemobile, Genesis, Ultra/Virtual and GPFD)
    378451 Soda Sorb Filter Cartridge - for VISITRAP filter housing, p/n 100002890 and filter traps p/n 100002891 & 100004724 purchased after 8-1-09.
    378444 Activated Charcoal Filter Cartridge - for VISITRAP filter housing, p/n 100002890 and filter traps p/n 100002891 & 100004724 purchased after 8-1-09.
    430272 Molecular Sieve Cartridge for Water Vapor (Filter Cartridge) for VISITRAP filter housing, p/n 100002890 and filter traps p/n 100002891 & 100004724 purchased after 8-1-09.
    406222 Backstreaming Trap (for use with D16 & 25B pumps)
    406239 Activated alumina for Backstreaming Trap (2 liter)( p/n 406222 requires 1 liter)
    435208 Required Adapter for Backstreaming Trap (required with part #406222)
    Shell Bath Adaptor
    172361 Polypropylene Plug - adapts all filter seal flasks to the lift device supplied with any VirTis shell freezer.
    Flasks
    235390 40 mL Wide Mouth Filter Seal Flask - Complete Assembly. Includes, O-Ring,1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    235382 75 mL Wide Mouth Filter Seal Flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    118174 150 mL Wide Mouth Filter Seal Flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    118208 300 mL Wide Mouth Filter Seal Flask - Complete Assembly. Includes, O-Ring,1 Filter Paper, Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    118232 600 mL Wide Mouth Filter Seal Flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    118273 1200 mL Wide Mouth Filter Seal Flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    118307 2000 mL Wide Mouth Filter Seal Flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    312892 40 mL safety coated wide mouth filter seal flask. - Complete Assembly. Includes, O-Ring, 1 Filter Paper, Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    312900 75 mL safety coated wide mouth filter seal flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    312918 150 mL safety coated wide mouth filter seal flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    312926 300 mL safety coated wide mouth filter seal flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    312934 600 mL safety coated wide mouth filter seal flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    312942 1200 mL safety coated wide mouth filter seal flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    312959 2000 mL safety coated wide mouth filter seal flask - Complete Assembly. Includes, O-Ring, 1 Filter Paper , Widemouth Flask Cover, Flask bottom and Filter Disk. DOES NOT INCLUDE ADAPTERS.
    233973 40 mL wide mouth filter seal flask - Bottom Only
    233890 75 mL wide mouth filter seal flask - Bottom Only
    148957 150 mL wide mouth filter seal flask - Bottom Only
    149005 300 mL wide mouth filter seal flask - Bottom Only
    149088 600 mL wide mouth filter seal flask - Bottom Only
    149120 1200 mL wide mouth filter seal flask - Bottom Only
    149146 2000 mL wide mouth filter seal flask - Bottom Only
    312827 40 mL safety coated wide mouth filter seal flask - Bottom Only
    312835 75 mL safety coated wide mouth filter seal flask - Bottom Only
    312843 150 mL safety coated wide mouth filter seal flask - Bottom Only
    312850 300 mL safety coated wide mouth filter seal flask - Bottom Only
    312868 600 mL safety coated wide mouth filter seal flask - Bottom Only
    312876 1200 mL safety coated wide mouth filter seal flask - Bottom Only
    312884 2000 mL safety coated wide mouth filter seal flask - Bottom Only
    148916 150mL and 300mL Cover only for the Wide Mouth Filter Seal Flask
    149039 600, 1200, 2000mL Cover only for the Wide Mouth Filter Seal Flask
    233882 40 and 75mL Cover only for the Wide Mouth Filter Seal Flask
    171967 Silicone Rubber O-Ring for 40 & 75mL flask tops.
    171991 Silicone Rubber O-Ring for 150 & 300mL flask tops.
    172023 Silicone Rubber O-Ring for 600, 1200 & 2000mL flask tops.
    172452 Filter Paper for Flasks - 100/pk -40 & 75 mL flasks
    172460 Filter Paper for Flasks - 100/pk -150 & 300 mL flasks
    172478 Filter Paper for Flasks - 100/pk - 600, 1200 and 2000 mL flasks
    438032 Container flask consisting of a 13" diameter x 13" tall stainless steel container with a clear acrylic cover (with locating stops), a 3/4" Quickseal valve, to be used to dry bulk products. Requires 36" tubing (P/N 196279)(2) plastic clamps (P/N) 376877, and (2) adapters (P/N 177923) - NOT INCLUDED.

      

    VIRTIS FREEZEMOBILE SHELL BATH FREEZER

    The Freezemobile Shell Bath, a floor model shell bath available in -50 or -75C configurations, helps to decrease manifold freeze drying time. The FSB rotates the flask on its axis thereby coating the interior surface of the flask with frozen product. This increases the surface area of the product-to-energy input, as well as vapor removal; thus helping to reduce the freeze drying process to the shortest time possible when utilizing flasks and a manifold system.

    The FSB is available with the choice of one or two baths contained within the same cabinetry.

    KEY FEATURES

  • Compact, bench-top design
  • Temperature to -50 or -70C
  • Reliable motor driven rollers for flask rotation.
  • Single or Dual Bath
  • KEY BENEFITS

  • Decrease drying time by shell freezing product (vs static freezing) thereby increasing surface area for energy input and vapor removal.
  • Accommodates a variety of flasks
  • Easy install, requires standard laboratory utilities
  • Specifications
    ES
    EL
    Maximum Low Bath Temperature (°C) 60Hz or 50Hz
    -50C
    -70C
    Maximum Flask Capacity -- Single chamber. For dual chamber simply double the number of flasks
    40 ml
    75 ml
    150 ml
    300 ml
    600 ml
    1200 ml

    4
    4
    4
    2
    2
    1

    4
    4
    4
    2
    2
    1
    Note: Performance specifications are based on SP Industries test data from units operating at an ambient room temperature of approximately 20 °C.
    SP Industries recommends an operating range of 15-25 °C (59-77 °F).
    Dimensional Data
    ES
    EL
    Width (in. / cm)
    25 / 3163.5
    Depth (in. / cm)
    29.0 / 73.3
    Height (in. / cm)
    41.5 / 105.4
    Approximate Weight (lb / kg)
    300 / 136
    375 / 170
    Minimum Clearance
    on All Sides (in. / cm)
    10.0 / 25.4
    « Liyofilization (Freeze Drying) Instruments