RAYPA Microprocessor Controlled Vertical Autoclaves

RAYPA Microprocessor Controlled Vertical Autoclaves

Adjustable temperatures from 105ºC to 139ºC.
Maximum pressure: 2,5 bar.

o3


SECURITY
  • Independent device that blocks the lid of the autoclave while there is pressure in the sterilization chamber.
  • Safety thermostat of over-temperature.
  • Safety presostat of over-pressure. It disconnects the heating in case of exceeding pressure.
  • Safety valve. It discharges the pressure in case of exceeding the maximum level.

CHARACTERISTICS

  • Steam sterilization autoclave with simple chamber.
  • External case and top made of stainless steel AISI 304.
  • Tank, lid and closure made of stainless steel AISI-316.
  • Tank water for the autoclave feeding, with maximum and minimum level detector.
  • Automatic water filling in the sterilization chamber.
  • Air purge and final drying with vacuum system
  • Curled up orifice BSP 1/2” with cap, to allow the probe’s introduction for the autoclave’s validation or calibration (rear side accessible).
  • RS-232 exit to connect a printer or PC.
  • Silicone gasket in the lid.
  • Temperature sensor PT 100 Class A
  • Temperature’s control by microprocessor with P.I.D. action.
  • Electric heating by protected elements inside the chamber.
  • Supplied with perforated tray to protect the heating element, and without baskets.

TECHNICAL DESCRIPTION

1. Interface outsource RS-232.
2. Microprocessor.
3. Mains switch.
4. Mano-vacuometre.
5. Printer of continuos sheet (accessory installed in the factory).
6. Termic protector of the lid.
7. Condensed tank filled.

MICROPROCESSOR FUNCTIONS AND CHARACTERISTICS

The autoclaves STERILMATIC- C are equipped with a microprocessor, the result of our investigation and long experience as a manufacturer of autoclaves, to fulfil the necessities and demands of our customers.

The microprocessor, provided with an alpha-numeric screen of liquid-glass, shows which part of the process is doing at any time, and which failure may happen, printing the results of the sterilization, as well as the date and the hour to ensure the product sterile.

It can also admit a second temperature probe to detect in the "heart" of the liquids, or in dispensable bags the real temperature, sterilizing them correctly and efficiently. In sum, it has been designed to make easy the sterilization process.

 

   
« Autoclaves