Biotron LiFlus SP (300L-1000L)

LiFlus SP (300L-1000L)

Equipped with stainless steel and insitu sterilizable system.

Integrated Microprocessor Controller
Very easy to connect with the various systems such as memory stick, Printer, Computer and etc. by using the RS 232C communication protocol
Head lifting system ? User interface
The sterilization procedures are programmable and can be modified by users
Biotron can optionally provide Validation support

liflus sp3

FEATURES

The LiFlus SP(300L~1000L)is a rarge size pilot scale fermentation systems and the top driving mechanism is applied. The head plate lifting system by air cylinder and linear motion guide is adapted in standard specification.
The system can be used for microbial, insect and mammalian cell culturing procedures. The stainless steel(SUS 316L) vessel and the whole attachments can be sterilized automatically or manually in thispilot scale fermentation system and the whole fermentation procedures can be also performed automatically. The mesured values. The procedures and monitored data are graphically displayed in the 8.5" color LCD screen and all the control parameters can be adjusted in the graphic mode.
This system is designed with the spirit of mas production process to apply the system in the pilot scale for the test production to the mass production in the small scale plant.

  • This system can be washed and repaired easily as the head plate lifting system is adapted in the standard specification.
  • The pH, DO, temperature and rotation speed of the agitator are measured and controlled by the integrated controller system.
  • The temperature of the vessel is measured by the RTD(Pt-100) and controlled by the digital PID control algorithm.
  • The DC servo motor or AC geared motor is installed ont he top of the head plate and the carbon-tungsten carbide mechanical seal protects the agitation system from the contamination.
  • The air driven diaphragm style valve protects from contamination and easy to wash and make maintenance.

    Vessel
  • The stainless steel(SUS 316L) is used to prevent contamination and rusting.
  • The water jacket system is adopted for precise temperature control.
  • The sight glass makes to monitor the status of the media.
  • The redundant ports are installed on the head plate that the auxiliary sensor can be installed.
  • The sensor ports are made in the circumferential direction on the lower side of the vessel.

SPECIFICATIONS

Agitation Drive DC motor, AC Geard motor Top drive motor (mechanical drive)
 
Range 50~550 rpm 1 rpm
 
Sensor Magnetic hall sensor
 
Impellers Rushton turbine impeller(SUS 316L) Foam breaker(SUS 316L)
 
Control Microprocessor based PID
Temperature Range() From 3 above the cooling water temperature to 80
(accuracy 0.1)
 
Control 100L~200L the temperature is automatically controlled by the built-in heater cartridge.
200L~700L the temperature is automatically controlled by the external heat exchanger system.
 
Sensor RTD(Pt-100)
Aeration Sparger Ring sparger (SUS 316L)
 
Inlet Filter The cartridge type sterilizable pleated type O.2 absolute filter is applied.
 
Outr Filter The same as inlet filter specification.(optional item)
 
Control Range Different vessel size and/or ordered specifications.
Materials & Finish Vessel Using 316L stainless steel it is polished mechanically and/or electrically.
 
Piping 316 stainless steel prevents contamination and is polished by electrically.
 
O-rings / Gaskets Viton or silicone material is used for the O-ring and the EPDM is used for the gasket.
Control Unit Panel 8.5" Graphic Color LCD, Membrane keypad
 
Communications Memory stick, printer, computer, BioG - and etc. with the RS-232C communication protocol.
 
Controller Board MC68EC020 microprocessor based integrated controller board is adopted to measure, control and display the fermentation system.
Pressure control The back pressure is controlled manually and/or automatically
   
Power Supply 220V 50/60Hz single phase, 380V 50/60Hz theree phase
Data Storage pH, DO, Pressure, Temperature and Agitation speed
Heating Plate The head lift system is powered by air cylinder and guided by two sets of linear motion guide. The lifting load capacity can be adjusted and designed for the size of the head plate.

VESSELS 

 Fermentor Dimension

Catalog Number Total Vol.
(working Vol.)

Inner Dia.
(mm)

Inner Heighta
(mm) 		Impeller Diameter
(mm)		 D/P
(%)		 H:D
D H P
PF2S5D100 100L (70L) 385 900 155 40 2.3 :1
PF2S5D200 200L (150L) 500 1055 200 40 2.1 :1
PF2S5D300 300L (210L) 550 1255 220 40 2.3 :1
PF2S5D500 500L (350L) 680 1400 280 40 2 :1
PF2S5D700 700L (500L) 750 1600 300 40 2 :1
« Bio Reactors / Fermentors