- Industrial
- Automatic Paper Testing ( Autoline Profiler )
- Climate Chambers
- Crushers / Pulverizers / Dividers
- Electro Analyzer
- Gas Analyzers
- Industrial Textile Treating Systems
- Material Test Chambers
- On-Line Chemical Analyzers
- Package Quality Testing Instruments
- Paper & Board Process Optimization Instruments
- Paper Testing Instruments
- Petroleum Testing Instruments
- Plant Growth Chambers
- Pulp Testing Instruments
- Sieve Shakers / Sieves
- Simulation Chambers
- Laboratory
- Autoclaves
- Balances
- Baths and Circulators
- Bio Reactors / Fermentors
- Blenders
- Block Heaters
- C / H / N - Sulfur Analyzers
- Calibration Equipment
- Calorimeters
- Centrifuges
- Chromatography
- Concentrators / Evaporators
- Conductivity Meters
- Deep Freezers / Freezers
- Electrical Test Equipment
- Electronic Test Instruments
- Electrophoresis and Accessories
- Flowmeters
- Fraction Collectors
- Furnaces
- Glassware Washers
- Heating Mantles
- Homogenizers
- Hot Plates
- Incubators
- Ion Meters
- Liyofilization (Freeze Drying) Instruments
- Magnetic Stirrers
- Mass Spectrometry Systems (GCMS)
- Melting Point Apparatus
- Microplate Readers
- Microscopes
- Mills
- Mixers
- Moisture Analyzers
- Organic Synthesis Systems
- Ovens
- Oxygen Meters
- pH Meters
- Photometers
- Polorimeters
- Presses
- Pressure / Vacuum Meters
- Proximate Analyzer / Ash Fusion Tester
- Pumps
- Reactors
- Recorder and Dataloggers
- Refractometers
- Rotary Evaporators
- Salinity Meters
- Sample Preparation Bombs
- Shakers
- Spectrophotometers
- Sterilizers
- Temperature Controlled Heating & Cooling Systems
- Temperature Measuring Instruments
- Thermocycler (PCR)
- Thermohygrometers
- Ultrasonic Cleaners
- Vibration / Leak Detection Instruments
- Viscometers
- Water Purification Systems
- Water Testing Instruments
BINDER KT Series Cooled Incubator (KT115)
BINDER KT Series Cooled Incubator (KT115)
Refrigerated incubator with Peltier technology
The new KT 115 combines outstanding performance with impressive energy efficiency and environmental friendliness. The KT 115 incubator is state-of-the-art in application and protects the samples.
Advantages:
- Energy efficient, environmentally friendly and secure
- Disinfection at 100 °C
- Broad range of applications
Areas of application:
-
Basic Research / Research Institutes
-
Food / Beverage
-
Microbiology
Features | Customer benefits | Characteristics |
---|---|---|
APT.line™ Technology |
|
APT.line™ for maximum precision
|
Disinfection and Cleaning |
|
|
Interior Chamber Design |
|
|
Cooling and Heating System |
|
|
Controller Input |
|
|
Accessories and Service |
|
|
APT.line™ preheating chamber technology with Peltier cooling system and tubular heater
- Pushbutton/rotary knob
- Easy-to-read menu guidance
- Variable programming options
- 100 programs with 2 GB internal memory
- Weekday programming
- USB port for easy data transfer
KT 115 | ||
---|---|---|
Exterior dimensions | ||
Width (mm) | 860 | |
Height (incl. feet) (mm) | 715 | |
Depth (plus door handle, I-panel and connection 100 mm) (mm) | 720 | |
Wall clearance, rear (mm) | 100 | |
Wall clearance, side (mm) | 240 | |
Number of doors (ea.) | 1 | |
Inner glass door(s) (ea.) | 1 | |
Interior dimensions | ||
Width (mm) | 600 | |
Height (mm) | 480 | |
Depth (mm) | 355 | |
Interior volume (l) | 102 | |
Racks (number standard/max.) | 2 / 6 | |
Load per rack (kg) | 40 | |
Permitted total load (kg) | 120 | |
Weight (empty) (kg) | 88 | |
Temperature data | ||
Temperature range (°C) 1) | 4 - 100 | |
Temperature variation | ||
at 4 °C (± °K) | 0,3 | |
at 25 °C (± °K) | 0,1 | |
at 37 °C (± °K) | 0,3 | |
Temperature fluctuation max. (± K) | 0,1 | |
Recovery time after door was opened for 30 sec 2) | ||
at 4 °C (min.) | 8 | |
at 25 °C (min.) | 1 | |
at 37 °C (min.) | 1 | |
Electrical data | ||
IP protection class acc. to EN 60529 | IP 20 | |
Voltage (± 10%) 50/60 Hz (V) | 200-240, 1 N ~ | |
Nominal power (kW) | 0,7 | |
Energy consumption 3) | ||
at 4 °C (W) | 250 | |
at 25 °C (W) | 90 | |
at 37 °C (W) | 75 |
1) Lower values are valid up to an ambient temperature of max. 25 °C.
2) To 98% of the set value
3) These values can be used for dimensioning air condition systems
The useable interior height depends on the position of racks.
OPTIONS | |
---|---|
Access port with silicone plugs 10, 30, 50, 100 mm | O |
Securing elements for additional fastening of racks (1 set of 4 pieces) | O |
Anti-slip rubber pads for safe stacking (1 set of 4 pieces) | O |
Temperature measurement acc. to DIN 12880 (27 measuring points, at 23 liter units 15 measuring points) at 37 °C (98.6 °F) or at specified temperature with measuring protocol and certificate | O |
Factory calibration certificate. Measurement in center of chamber at specified testing temperature | O |
Extension to factory calibration certificate. Each additional measurement at an additional measuring point or temperature | O |
Zero-voltage relay outputs accessible via 6-pin DIN socket. Additional module for controlling 2 relay outputs via 2 of the programmable controller’s controller contacts. Outputs can be switched on and off either manually or automatically | O |
Waterproof interior socket 230 V AC (max. 200 W), IP65 protected, with corresponding plug. Max. allowed operating temperature 50 °C (122 °F) | O |
Additional PT 100 temperature sensor, flexible installation, with external connection, including LEMO connector (3-pin) | O |
Analog temperature output, 4-20 mA, with 6-pin DIN socket (output not adjustable) | O |
Data Logger Kit T 220: For the continuous temperature recording of -90 °C (-130 °F) to 220 °C (428 °F). Kit includes 1 data logger, PT 100 sensor with 2 m extension cable and 1 fixture for the connection at the BINDER unit | O |
Data Logger Software: Configuration und evaluation software for all BINDER Data Logger Kits, incl. data cable (RS 232) | O |
Interface RS422 | O |
Door heating | O |
Rack, stainless steel | O |
Shelf, perforated, stainless steel | O |
Vibration compatible shelf / platform (positioned at bottom level) to be mounted inside the chamber for shaker / spinner / roller operation, max.load 67 kg | O |
Reinforced rack, stainless steel, with 1 set of securing elements (1 set of 4 pieces), max. load 60 kg (154 lbs.) | O |
Locking door handle with key | O |
Temperature safety device, class 3.3 (DIN 12880) with visual alarm | O |
Interior lighting (15 W) | O |