Aqua Measure Hand-Held Moisture Meters

Aqua Measure Hand-Held Moisture Meters

Model 9XDC for Plaster and Wood 

Description:
Model 9XDC is a pocket-sized, low cost, rugged meter designed to provide fast and accurate LED moisture readout. It tests the moisture content of lumber from 12% to 28% and of dry wall/wall plaster from 3% to 7%.

Download PDFs:
Printable data sheet
Printable product manual

Protective case sold separately.

Price $99.00



Model A8 All Purpose Moisture Meter

Description:
Model A8 Moisture Meter uses the RF power loss method to measure the moisture content of flat, curved, smooth, or rough surfaces such as cones or beams of yarn, rolls, or stacks of cloth, rolls or stacks of paper or paperboard, carpets, tiles, etc. The electrode with stainless steel buttons covers an area 3 inches in diameter and has a penetration depth of 3/4 inch.

Download PDF:
Printable data sheet

 



Model A8AF Radome Moisture Meter 

Description:
Model A8AF Radome Moisture Meter indicates moisture pockets in aircraft radomes by measuring the RF dielectric power loss of material in contact with the electrode sensor.

Download PDFs:
Printable data sheet
Printable product manual


Model AM-III Paper Moisture Meter 

Description:
Model AM-III Paper Moisture Meter permits instantaneous, nondestructive moisture measurement from 0% to 15% on all types of paper and paperboard rolls and stacks that are 2 inches thick or more.

Download PDFs:
Printable data sheet
Printable product manual


Model AM-III-B Paper Moisture Meter 

Description:
Model AM-III-B Paper Moisture Meter provides instantaneous, nondestructive moisture measurement from 0% to 15% on single sheets of paper.

Download PDF:
Printable data sheet

 



Model B Concrete Block Moisture Meter

Description:
The Model B design is based on 40 years of experience in the field of moisture testing. The instrument was specifically designed for the concrete block industry under the guidance of C.M. Rollins, former Director of Research, Basalt Rock Company. Mr. Rollins used the Model B in conjunction with the ASTM Method C-140 to establish calibrations for over 34 different kinds of concrete block that were procured from more than 18 manufacturers throughout the United States.

Download PDF:
Printable data sheet

 

Model DA8 All Purpose Digital Moisture Meter

Description:
Model DA8 Digital Moisture Meter provides instant moisture readings from 0% to 35% on a wide variety of materials, including carpet, yarn, cloth, non-woven, baled cotton and tobacco, gypsum board, etc. Up to 99 calibration tables can be stored in its memory chip.

Download PDF:
Printable data sheet


Model DC-2000 Wood Moisture Meter 

Description:
Model DC-2000 Wood Moisture Meter is designed and calibrated to test the moisture content of lumber, wood products, and surfaces to be painted. It provides fast and accurate digital moisture readout in the moisture range of 5% to 65%.

Download PDFs:
Printable data sheet
Printable product manual

Price $96.00


Model DC-2000-BP Baled Paper Moisture Meter 

Description:
Model DC-2000-BP Moisture Meter is calibrated to test the moisture content in paper and other bales made up of scrap materials. It provides fast and accurate digital moisture readout in the moisture range of 5% to 25%. Case not included.

Download PDF:
Printable data sheet

Price $415.00



Model DC-2000-C Wood Moisture Meter 

Description:
The Model DC-2000-C Wood Moisture Meter is a portable handheld microprocessor with an external Electrode Assembly that provides fast and accurate digital moisture readout in the moisture range of 5% to 65%. It is auto-ranging with self-checking and a low battery indicator.

Download PDF:
Printable data sheet


 

Model DC-2011 Cork Moisture Meter 

Description:
The Model DC-2011 Cork Moisture Meter is designed and calibrated for testing moisture content in cork. It provides fast and accurate digital moisture readout in the moisture range of 4% to 22%. Case not included.

Download PDF:
Printable data sheet

Price $200.00

 

Model G9 “Aqua Probe” for Coffee Beans

Description:
The Model G9 “Aqua Probe” Moisture Meter for Coffee Beans is calibrated for whole roasted, ground roasted, and whole green coffee beans.


Model G9 for Powdered and Granular Materials

Description:
Model G9 Moisture Meter is designed for semi-solids, as well as powdered, granular, or textile materials, and pliable papers in rolls or stacks.

 

Model L Lumber Moisture Meter 

Description:
Model L Lumber Moisture Meter is pre-calibrated for 77 hard and soft woods in the 0% to 25% moisture range. It provides nondestructive tests and moisture results.

Download PDF:
Printable data sheet

 

 

Model LG Gypsum Moisture Meter 

Description:
Model LG Gypsum Moisture Meter is excellent for testing gypsum wallboard in stacks or sheets. This instrument measures the moisture in the gypsum plasterboard 1/4 inch to 3/4 inch thick and has a color-coded direct-reading dial for fast comparison. It can be used to check the moisture distribution pattern on the board, along either the length or width.

Download PDF:
Printable data sheet
Printable product manual



 

Model LGF Gypsum Moisture Meter 

Description:
The Model LGF Gypsum Moisture Meter is excellent for testing gypsum wallboard as it moves or in stationary sheets or stacks. This instrument has a stainless steel, flat-plate electrode and measures the moisture in the gypsum plasterboard 1/4 inch to 3/4 inch thick. The meter has a color-coded direct-reading dial for fast comparison. It can be used to check the moisture distribution pattern on the board, along either the length or width. The flat sensor can be slid along the wallboard surface without concern for static charge buildup that might damage other sensors.

Download PDFs:
Printable data sheet
Printable product manual

 

Model LP Plaster Moisture Meter 

Description:
The Model LP Plaster Moisture Meter is designed to test irregular, flat, and curved surfaces on plaster and lumber.

Download PDFs:
Printable data sheet
Printable product manual

 



 

Model MCPC Laboratory Moisture Computer 

Description:
The Model MCPC Laboratory Moisture Computer uses the principle of weight-corrected capacitance measured at radio frequencies to determine a physical property (dielectric constant) that can be related to moisture content. This technique is useful in measuring moisture because RF completely penetrates nonconductive materials and therefore can gauge moisture throughout the material. The test is instantaneous and completely nondestructive, and no sample heating or chemicals are required. The Model MCPC is often used as a safe and inexpensive replacement for the Karl Fischer chemical titration moisture analysis. It also replaces heat lamp 'moisture balance' type heating devices.

Download PDF:
Printable data sheet


 

Model N8 Narrow Materials Moisture Meter

Description:
The Model N8 Moisture Meter has a narrow electrode and is designed for flat, curved, smooth, or rough surfaces such as cones or beams of yarn, rolls or stacks of cloth, rolls or stacks of paper or paperboard, carpets, tiles, etc. The electrode with stainless steel buttons covers an area of 1-1/4" x 3" and has a nondestructive penetration depth of 1/2 inch.

Download PDF:
Printable data sheet

 

Model PM-80 Paper Moisture Meter

Description:
The Model PM-80 Paper Moisture Meter permits instantaneous, nondestructive moisture measurement from 0% to 35% on all types of paper and paperboard rolls and stacks that are 2 or more inches thick.

Download PDFs:
Printable data sheet
Printable product manual

 

Model T8 Thin Materials Moisture Meter

Description:
The Model T8 Moisture Meter uses the RF power loss method to measure the moisture content of flat, smooth, thin materials such as single sheets or 1/8-inch stacks of veneer, cloth, paper, or paperboard products. The specifically designed electrode of three concentric brass rings covers an area 3 inches in diameter and has a shallow electrode with a nondestructive penetration depth of 1/8 inch.

Download PDFs:
Printable data sheet
Printable product manual

 

Model V Veneer Moisture Meter

Description:
The Model V Veneer Moisture Meter obtains instantaneous, nondestructive moisture analysis from 0% to 25% for 48 hard and softwoods.

Download PDFs:
Printable data sheet
Printable product manual

 

 

« Moisture Analyzers