METROHM APPLIKON ADI 2045TI Process Analyzer

METROHM APPLIKON ADI 2045TI Process Analyzer

 

You want to bring your laboratory analysis online in your process? Metrohm Applikon can do that for you!

We present to you the ADI2045TI Process Analyzer, the latest generation and industry leader of wet chemical analyzers on the market.

 

 

The analytical system uses high quality Metrohm analysis modules like the Titrando range of titrators. Combining Metrohm’s knowledge and experience in laboratory analysis and Applikon’s experience in process control instrumentation results in an analyzer that can perform nearly every ON-line or AT-line wet chemical analysis in the most difficult environments. It’s unique modularity design makes it possible to adapt the analyzer to the specific needs of the application. Multi-parameter and multi-stream analyses are easily implemented as well as analog and digital communication with other devices.

 

Analysis capabilities

  • Titration for a broad range of application
  • Karl Fischer titration for water determination in liquids
  • Dynamic Standard Addition with Ion Selective Electrodes
  • Absorbance Colorimetry for water quality analysis & plating solutions
  • Direct Measurements for measuring pH, conductivity, redox and temperature
  • Third party devices such as density, flow, refraction, turbidity,..
  • Special applications are available on request!

 

Highlights

  • IP66/NEMA 4 rated housing for harsh industrial environments
  • Complete separation of the wet part and electronic compartment of the analyzer
  • Modular design for maximum flexibility and adaptation to your process requirements
  • Multiple streams, analysis methods and chemical component possibilities
  • Simultaneous analysis of different streams and methods
  • Industrial PC Controller with 15” TFT touch screen
  • Ethernet TCP/IP network communication/remote operation
  • I/O Bus Terminal capability for result transmission, liquid handling, preconditioning and discrete signals for remote Start/Stop and alarms
  • TiamoTM software for method programming and automation. Direct transfer of your proven laboratory method to your process analyzer
  • Automatic calibration and validation of analysis results
  • Real time titration, trend graphs and result databases
  • Batch sampling and measurement principal for lower operational costs
  • Standalone unit AT-line or part of an integrated turnkey system ON-line

 

Typical applications

  • Salt in crude oil
  • Hardness in brine in chloralkali industry
  • Caustic, carbonate and amines in gas and liquid scrubbers
  • Alkalinity in brewing water in beverage industry
  • Ammonia in waste water nitrification/denitrification process
  • Hydrogen sulphide and ammonia in stripped sour water
  • WAD/Total cyanide in metal mining
  • TMAH in semiconductor photolithography
  • Peracetic acid in cleaning agents for the food and beverage industry
  • Chloride and iron as metal corrosion indicators
  • ABC titration in white, green and black liquors in pulp and paper industry
  • Sodium and silica in boiler feed water in power utility and process water

     

Main analytical techniques

Titration

This absolute analytical method offers highest accuracy, a wide measuring range and a long list of applications that continues to grow. The high specificity, tolerance to solids and no requirement for calibration make this a favourite choice for a large number of analytical tasks.

Dynamic Standard Addition

A very common method of measuring specific ions in solution that takes advantage of the Nernst equation. An ISE electrode reacts to specific ions in the analyte, electrodes are available for a number of different ions. The electrode signal measured is a direct measure for the concentration of the analyte. The Dynamic Standard Addition (DSA) ensures improved measurement accuracies and validates each and every result. Among the long list of ISE applications are: Sodium in high purity water, Potassium, Nitrate, Fluoride and Ammonia.

Differential Absorbance Colorimetry

A technique that is very useful for low concentrations of analytes. Metrohm Applikon has the ability to extend the range to accommodate all requirements. Using Differential Absorbance Colorimetry (DAC) the effect of background sample colour and turbidity is removed. The wide range of long-term stable LED sources allow us to offer individual solutions for a wide range of applications. Typical examples include COD measurements, Ammonia and Chlorine in waste /drinking water, Silica and Phosphate in boiler feed water, Iron in many different waters, Phenol in industrial waste Water, calcium and magnesium in Brine.

Analysis method:
Titrations
Dynamic Standard Addition
Differential Absorbance Colorimetry
Direct Measurement

Repeatability:
Typical 1-2%

Inaccuracy:
Typical 1-2%

Analysis time:
Typical 5-10 min.

 

Download brochure 2045TI 


             
« On-Line Chemical Analyzers